new monster boat projects
01-04-2019, 12:23 PM
#53
I worked in a shop that made FG aircraft parts and we never used an "infusion" layup. We used pre-impregnated(prepreg) fabrics which, in a nutshell, were FG cloth coated with various types of resins. These were then covered with plastic and vacuumed down to make the layup thinner while being "baked" in an oven. Some parts had paper based honeycomb encased in them but otherwise, all the parts were made the same way
01-21-2019, 09:15 AM
#54
Thread Starter
update
upper deck came out of mold, now you may see the size..... the guy is our composite expert who is producing the hull and all needed composite parts....
Last edited by MATHO; 01-21-2019 at 09:17 AM. Reason: added info
06-06-2019, 08:58 AM
#58
Thread Starter
hull #2
this will be mine, is ready yet but the upper and lower halves have not been bonded yet because the rails have to be glued in before. These raisl have to carry all internal sub-systems like
- 2 x RAT HOUSE
- 4 x gas tank
- 1 x RC-box
- 1 x battery box
- 1 x E-pump carrier.
pic are talking self.....
- 2 x RAT HOUSE
- 4 x gas tank
- 1 x RC-box
- 1 x battery box
- 1 x E-pump carrier.
pic are talking self.....
06-18-2019, 10:20 AM
#61
Thread Starter
next steps
test of package with wooden dummies passed, today I have pre-assembled the first 4 drives, but you can see: thrust ball bearing still missed.
What you can see: the rocker bearing is the only part which we did not design,
What you can see: the rocker bearing is the only part which we did not design,
06-24-2019, 09:40 AM
#62
Thread Starter
update
meanwhile I have prepared the dashboard
night time.....
daytime. The LED-lights with and w/o symbols I have found in ebay, the other ones I have build by my own.
night time.....
daytime. The LED-lights with and w/o symbols I have found in ebay, the other ones I have build by my own.
10-08-2019, 08:05 AM
#63
Junior Member
Join Date: Oct 2019
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
WOW - Amazing! I just found this thread, what a great project!
>3m will not fit in my car and not in my appartment, so I would be very interested in the 1,6m Version....
Are you still working on it...? Will it be for sale or do you just build it for yourself?
Best regards - Bedo
>3m will not fit in my car and not in my appartment, so I would be very interested in the 1,6m Version....
Are you still working on it...? Will it be for sale or do you just build it for yourself?
Best regards - Bedo
The following users liked this post:
Justaddwata (07-20-2020)
07-20-2020, 12:42 AM
#68
Join Date: Dec 2011
Location: Porto Sant\'elpidio, ITALY
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
07-21-2020, 01:10 PM
#70
Join Date: Dec 2011
Location: Porto Sant\'elpidio, ITALY
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
I see that there is little participation in this forum (gas & electric), i hope you continue to post the progress of the project.
Cheers
07-22-2020, 10:49 PM
#75
Thread Starter
need your e-mail adress
to get you in contact. You can send via my Homepage www.matho-powertrain.de
There you can find mine
There you can find mine