RCU Forums
Graupner Sonic Pro 10x6 & 11x6 I going to break in a brand new FA .40-a with the 11x6 using both the stock muffler and a turbo header. The side profile kind of reminds one of a Sea Gull's wing, a very efficient air foil if there every was one.
Graupner Sonic Pro 10x6 & 11x6 I going to break in a brand new FA .40-a with the 11x6 using both the stock muffler and a turbo header. The side profile kind of reminds one of a Sea Gull's wing, a very efficient air foil if there every was one.
0 2018/05/03 06:15:09
No leaks, not a drop
No leaks, not a drop
0 2018/05/03 10:08:57
Idle stock exhaust
Idle stock exhaust
0 2018/05/03 10:10:10
0 2018/05/03 10:11:21
Idle: stock exhaust
Idle: stock exhaust
0 2018/05/03 10:13:28
Max rpm: stock exhaust
Max rpm: stock exhaust
0 2018/05/03 10:14:49
Max rpm: with Turbo Header
Max rpm: with Turbo Header
0 2018/05/03 10:16:15
0 2018/05/03 10:19:05
Saito 1.30 re-built
Saito 1.30 re-built
0 2018/05/04 04:06:10
An example from the 2.20
An example from the 2.20
0 2018/05/05 05:48:01
A peak in the carb and you can barely see the LS sleeve, by removing the two right carb screws you can remove that air flow baffle and see them clearly. I did not set mine the same on purpose, they just ended up there.
A peak in the carb and you can barely see the LS sleeve, by removing the two right carb screws you can remove that air flow baffle and see them clearly. I did not set mine the same on purpose, they just ended up there.
0 2018/05/05 05:48:48
0 2018/05/06 15:15:15
This what I run in my FG 11 and my Husqvarna 50 cc chain saw.
This what I run in my FG 11 and my Husqvarna 50 cc chain saw.
0 2018/05/06 15:28:19
Won't mix with petrol oils but will mix with gasoline.
Won't mix with petrol oils but will mix with gasoline.
0 2018/05/06 15:29:47
0 2018/05/10 03:07:33
Great Paint
Great Paint
0 2018/05/12 03:36:15
0 2018/05/12 03:36:35
0 2018/05/12 03:38:23
Cleaner that really works
Cleaner that really works
0 2018/05/12 03:38:44
0 2018/05/15 03:48:48
The 2.20 ran so much better with the Iron Bay regulator, especially the idle.
The 2.20 ran so much better with the Iron Bay regulator, especially the idle.
0 2018/05/15 04:23:48
There were some complaints that the 2.20 wouldn't idle below 2,600, that was not true.
There were some complaints that the 2.20 wouldn't idle below 2,600, that was not true.
0 2018/05/15 04:24:49
Dan, is this a plane that you built, I like it and would like to build one.
Dan, is this a plane that you built, I like it and would like to build one.
0 2018/05/15 04:37:38
0 2018/05/16 10:27:54
0 2018/05/16 10:29:43
0 2018/05/17 04:13:38
0 2018/05/17 04:13:52
The .62-v @ 8,000 exactly
The .62-v @ 8,000 exactly
0 2018/05/17 10:49:56
Full blatt
Full blatt
0 2018/05/17 10:51:34
OS .62-v idle
OS .62-v idle
0 2018/05/17 10:53:13
OS .62-v weight
OS .62-v weight
0 2018/05/17 10:54:58
Saito .62-b weight
Saito .62-b weight
0 2018/05/17 10:56:55
K&S tube bits
K&S tube bits
0 2018/05/17 10:58:27
The aluminum K&S bushing fit the Saito .62 perfectly, the bronze made it fit the OS .62-v perfectly, no slop with either.
The aluminum K&S bushing fit the Saito .62 perfectly, the bronze made it fit the OS .62-v perfectly, no slop with either.
0 2018/05/17 11:01:22
No leaks
No leaks
0 2018/05/17 15:37:14
OS .95-V opened up
OS .95-V opened up
0 2018/05/18 03:26:09
Residual lube in the OS .95-V
Residual lube in the OS .95-V
0 2018/05/18 03:27:43
Saito .62-b on Sig Four Star
Saito .62-b on Sig Four Star
0 2018/05/20 04:41:51
Waiting on 10 oz Roto Flow
Waiting on 10 oz Roto Flow
0 2018/05/20 04:43:39
0 2018/05/20 12:20:00
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.